Image
Part Number -
S-UCD-M001
Contact Closure Pulse Input Adapter - 1 meter Sensor
$113.00 USD
Connects sensors with pulse outputs to data loggers with smart-sensor inputs; compatible with contact closures; 1 m cable length.
Overview
Connects sensors with pulse outputs to data loggers with smart-sensor inputs. Compatible with contact closures, such as tipping-bucket rain gauges or reed switches with a maximum input frequency of 2 Hz (2 pulses per second), and a preferred switch-type of normally-open. See how the pulse recorder works.
Features
- Plug-n-play adapter for pulse output sensors
- Automatically recognized by H21, H22, U30, and RX Series data loggers
- Compatible with contact closures, such as tipping-bucket rain gauges or reed switches with a maximum input frequency of 2 Hz (2 pulses per second)
Specifications
Maximum input frequency: 2 Hz (2 pulses per second)
Measurement range: 0 – 65,533 pulses per logging interval
Resolution: 1 pulse
Lockout time: 327 ms ± 10%
Recommended input type: Mechanical contact closure (example: reed switch in a tipping-bucket rain gauge)
Preferred switch state: Active low input Normally open
Edge detection: Falling edge, Schmitt Trigger buffer (logic levels: low ≤ 0.6 V, high ≥ 2.7 V)
Minimum pulse width: 1 ms
Input/output impedance: 100 KΩ
Open circuit input voltage: 3.3 V
Maximum input voltage: 3.6 V
User connection: 24 AWG wires, 2 leads: white(+), black(-)
Operating temperature range: -40° to 75°C (-40° to 167°F)
Overall cable length: 1 m (3.3 ft.)
Housing: Weatherproof PVC housing protects input adapter electronics
Housing dimensions: 14 x 0.95 cm (5.5 x 0.375 in.)
Weight: 310 g (11 oz.)
Bits per sample: 16
Number of data channels: 1
Measurement averaging option: No (reports the number of pulses over the logging interval)
Compatible items
USB Data Loggers - requires external sensor(s)
USB Data Loggers - w/external sensor(s)
Web-based Monitoring Systems - via remote communication
Water Flow
Recently Viewed
Sensor
Type K 12" Probe Thermocouple Sensor
A Type K thermocouple probe that can measure up to 900°C (1650°F) when connect to the HOBO UX100 thermocouple logger.
Sensor
Setra Differential Air Pressure - 0-10 inch WC Sensor
The 0-10 inch WC Differential Air Pressure sensor by Setra can be used for static or differential pressure in air or inert gases. This sensor is fully protected against reverse wiring and against over-pressure to 10psi, and outputs 0-5 VDC to the required FlexSmart Analog Module.